Incline, conveyors & custom
Detectronic metal detection
If the line does not fit a catalogue machine, we draw one that does
Detectronic builds incline conveyors with detection in the same frame, stainless conveyors and convergers to your belt height, and non-standard detectors when aperture, temperature or layout will not take a standard unit.
Track Int’l Trade specifies these for Egyptian plants from a layout, a photograph or a drawing — built in Støvring, supported locally.
Lift and inspect
Find the metal on the way up to the grinder, not after it. One handling step instead of a conveyor plus a separate detector.
Built to the layout
Discharge height, incline, belt width and cleat spacing are set by the plant, not by a standard length in a brochure.
Single-lane feeding
Convergers take packs from a thermoformer into one lane so the detector aperture can be smaller — and more sensitive.
OEM and specials
Non-standard apertures, high-temperature pipe, filler couplings, Ethernet and interface drawings for machine builders.
Three ways we build around the line
Incline block conveyors
Cleated belt from floor level to a grinder, mixer or hopper, with metal detection in the same frame.
- Frozen blocks, mince, trim and bulk that would slide on a flat belt
- Tool-free belt release for cleaning
- Washdown specification available
Stainless conveyors
Straight or curved conveyors, convergers and dividers, supplied alone or as the carrier for a detector or checkweigher.
- Belt height, width and length set by the machines either side
- Food-approved belting, centre drive available
- Fewer tips and jams at the transfer
Custom solutions
If the standard solution does not fit, Detectronic changes the machine, not the line. Drawn and fabricated in-house.
- Aperture or pipe outside the standard range
- Teflon piston and tube above 100 °C
- OEM builds with drawings and electrical specifications
Specifications
| Incline function | Cleated incline conveyor with integrated metal detection |
|---|---|
| Belt | Cleated modular belt; width, cleat height and pitch specified for the product |
| Layout | Discharge height, incline angle and length built to the receiving machine |
| Construction | Stainless steel, hygienic design, sealed levelling feet |
| Cleaning | Tool-free belt release; washdown specification available |
| Conveyors | Straight or curved; convergers and dividers; food-approved belting |
| Custom | Non-standard aperture, frame, temperature, couplings and OEM integration |
| Reject on an incline | Most installations stop the belt and signal rather than rejecting on the slope |
Gallery
Incline belts and custom frames
Track Int’l Trade · Detectronic
